Results 1 to 9 of 9

Thread: Sprint Treo pro (850) on Pageplus (need help with data setup)

  1. #1
    Join Date
    Jan 2010
    Posts
    3
    Feedback Score
    0
    vBActivity - Stats
    vBActivity - Bars

    Sprint Treo pro (850) on Pageplus (need help with data setup)

    I recently got my treo pro working with pageplus with the following steps:

    copy pageplus EDVO.prl file onto microflash memory card
    put memory card into phone
    press send enter ##775# (##prl#)
    enter six digit unlock code that I got from sprint when I activated my phone
    select update prl
    select menu -> edit
    browse for .prl located on memory card

    voice and sms works however the web browser can not connect and *22890 will not program my phone

    I have modified Power Vision settings found in connections in connections tab under settings from start menu as follows
    number to be dialed: #777
    username: (myphonenumber)@vzw3g.com
    password: vzw

    I did not specify a domain or any ip address and thinking this could be causing the trouble. I'd appreciate any help that could shine some light on this problem.

  2. #2
    Join Date
    Jan 2010
    Posts
    3
    Feedback Score
    0
    vBActivity - Stats
    vBActivity - Bars

    Update to getting over the air programming working

    I did get *22890 to program the phone after doing the following steps:
    download CDMA workshop
    download qualcomm diagnositc drivers
    connect phone to computer running xp via usb (vista may work)
    press send ##3424# (##diag#) then directed xp to folder containing drivers
    open CDMA workshop, selected com5, connect
    went to security tab and typed in unlock code then clicked spc - read
    typed in 000000 then clicked spc - write
    pulled battery out of phone and put in back in

    dialed *228 then dialed 1 to program phone and 2 to update prl
    phone did both successfully when the spc or unlock code was changed to 000000 however I cannot pull up a webpage in internet explore via pageplus with the following settings:

    number to be dialed: #777
    username: (myphonenumber)@vzw3g.com
    password: vzw

    or

    number to be dialed: #777
    username:
    password:

  3. #3
    Join Date
    Jan 2010
    Posts
    3
    Feedback Score
    0
    vBActivity - Stats
    vBActivity - Bars

    Solution to my problem

    For everyone who is in the same boat as I was:

    copy dcd Verizon Carrier 20081031.cab to phone and run it

    send ##778# for EPST settings

    MIP Profile
    Number of profiles: 6
    Active user profile index: 0
    MIP_MODE: Mobile IP Prefered
    MIP Reg Retries: 2
    MIP Reg Retry: 1750 ms
    MIP Pre-Reg Timeout: 0
    Mobile Node-HA: Enable
    Send A Reg: Disable
    Dormant Handoff Opt: Enable

    MIP Default Profile
    Enable Profile: Enable
    NAI: [email protected] ([email protected])
    DUN NAI: [email protected] so you can tether without a tethering package or

    [email protected] if you want paid tethering
    MN HA SPI Set: Enable
    MN HA SPI Value: 12C
    MN AAA SPI Set: Enable
    MN AAA SPI Value: 2
    Reverse Tunneling: Enable
    Home Address: 0.0.0.0
    HA Shared Secret: should be garbled characters (clear these fields)
    AAA Shared Secret: should be garbled characters (clear these fields)
    Primary HA Address: 255.255.255.255
    Secondary HA Address: 255.255.255.255
    DMU Pub Key: 10
    MN Authenticator: 0

    Security
    HDR AN AUTH User Id = [email protected]
    PPP USER ID = [email protected]

    Run QPST -> EFS Explorer
    copy 10.key to DMU folder

    open Internet Explorer and enjoy!

  4. #4
    Join Date
    Aug 2009
    Posts
    16
    Device(s)
    Samsung Intensity
    Carrier(s)
    Verizon Wireless
    Feedback Score
    0
    vBActivity - Stats
    vBActivity - Bars

    Thank you!

    cheetah9026, I will be going through the same setup process shortly. Thank you for posting your helpful results, I will do the same.

  5. #5
    Join Date
    Nov 2009
    Posts
    4
    Feedback Score
    0
    vBActivity - Stats
    vBActivity - Bars
    Thanks for taking the time to share.

  6. #6
    Join Date
    Feb 2011
    Posts
    1
    Feedback Score
    0
    vBActivity - Stats
    vBActivity - Bars
    does any one have a link where I can download qualcomm diagnositc drivers
    thanks for any help

  7. #7
    Join Date
    Mar 2011
    Posts
    1
    Feedback Score
    0
    vBActivity - Stats
    vBActivity - Bars

    Sure, Qualcom Drivers Link

    Quote Originally Posted by flyer123 View Post
    does any one have a link where I can download qualcomm diagnositc drivers
    thanks for any help
    Sure, Here's a Qualcomm Drivers Link :

    http://download.driverguide.com/driv.../d1767099.html

    On My Win XP Laptop : Drivers came up in Device manager After I entered ##3424# Which put's My Palm Treo
    Pro In diagnostic Mode if that helps ..........

    Here's a link to the latest Qualcomm QPST Phone Programmer I found so far :

    http://www.x-drivers.com/catalog/fla...pst/12051.html

    Last edited by wingnutc141a; 03-29-2011 at 08:03 AM.

  8. #8
    Join Date
    Aug 2012
    Posts
    7
    Feedback Score
    0
    vBActivity - Stats
    vBActivity - Bars
    im still stalled on the part that says the #777 login doesnt work. I cant connect the data. Everything else is working except pictures and internet.

  9. #9
    Join Date
    Dec 2012
    Location
    somewhere, u.s.
    Posts
    4
    Carrier(s)
    sprint
    Feedback Score
    0
    vBActivity - Stats
    vBActivity - Bars
    i know this is really old but where do i get a 10.key from?

Bookmarks