MOTOROLA V635
Motorola V635 Part 1 (93.6 MB)
Motorola V635 Part 2 (20.7 MB)

Motorola V635 Full (1+2) 114 MB

Motorola V635 Full (1+2) 114 MB

Included in the files above are
-firmwares 6DR, 6FR*, 88R, 90R, 93R, 4BR (in order from oldest to newest)
-FlashBackup 2.62
-Motorola USB Drivers v2.9
-P2K Advanced
-RSD_LITE_2_7
-RAMLDR
*-->has both MP and flexflash
----->
HOW TO FLASH GUIDE...

*1ST flash with 6FR and then with its flexflash

Install RSD Lite:

Install P2Kman

Download the Monsterpacks (MPs) you need, or you think you might need. If you are flashing to 6DR, then you must download the 6DR reflash so that your phone does not go through the reverse flip issue. Remember to flash the reflash after you have flashed with the original.

YOU MUST FLASH TO THE MONSTERPACK FIRST FOR ALL FLASHING. YOU CANNOT FLASH THE FIRST TIME WITH A REFLASH. For example : After flashing to the 6DR MP you have to download the 6DR RELFASH and flash that on top of the 6DR MP.

5. Make 100% SURE THAT YOUR TRANSFLASH / MICROSD CARD IS OUT. TAKE IT OUT NOW. Then goto MENU---> SETTINGS---> CONNECTION---> USB SETTINGS---. DEFAULT CONNECTION and set to : DATA/FAX CONNECTION. If you accidentally leave it on memory card say goodbye to your transflash card and your phone.

6. Connect the USB cord to your phone while turned on and closed. First plug the USB cord into your phone, then the other side into the computer. BE SURE THE CONNECTION IS SECURE AND WILL NOT BE DISTURBED. There have been stories of cats screwing up phones by knocking the cable loose, seriously.

7.Windows should make a "ding dong" sound to let you know it has recognized your phone as a USB device. When Windows recognizes your phone, it may ask to be pointed to drivers...then point it to the folder mentioned in #2.

8. Open RSD Lite. Click "Show Device" and it should recognize your phone. It will usually recognize your phone before pressing show device, but just do it anyway

9. Click the "..." next to the filename box to browse for the 6DR MP (or whatever Monsterpack you are flashing to). Then click "Start".

10. After clicking start it takes a few minutes. DO NOT touch your phone or the cable. It will look like the phone has turned itself off. This is what happens when your phone goes into bootloader (* + # + Power key) mode. When the flash is complete, your phone should turn itself back on to its normal set up.

10a. Reverse flip may occur if you are flashing to 6DR. I have only heard of this happening with 6DR. When this happens, it seems like your phone is on (external display light comes on, or keypad flashes, or both), but it looks like it is off. To determine if you have reverse flip, open your phone. If you get your regular screen and are flashing to 6DR, great. If you’re flashing to 6FR, you’re already done – congratulations!

If the screen is blank, keep the phone open and try using a paperclip to press the little button between the phone’s hinges, slightly above the right softkey. Your phone should think it is open again, and when you release the paperclip, it will act like it is closed

11. If, when your 6DR flashing is complete, you experience reverse flip (phone thinks it's opened when closed & vice versa), don't panic. Close your phone, press the “Show Device” button on RSD Lite, and use the steps 8-10 substituting the 6DR REFLASH for the MP. I always hit "Show Device" again before each flash, which may not be necessary but is a nice precaution. This should fix the problem. If you experience reverse flip with 6FR MP DO NOT use the 6DR REFLASH. Search around for the 6FR REFLASH file and use that. Once successful, you’re done!

12. Repeat steps 8-10 replacing the filename with the 88R MP or whatever MP you desire.

13. After each Flash is completed, you will probably have some reception difficulties. (Don't worry it is only temporary, your phone has a brand new database). Power Cycle the phone (turn it off, then on again) two times and turn it off. Then hook it up to the charger and let it completely charge again. It is always fine after that.

---->
This guide was not written by me therefore all thanks goes to the original author.

Like how to flash a V635 hasn't been posted here before?

http://www.howardforums.com/showthr...v635+tracymarie

It may be new to you, but it's been here on HoFo for what, over a year? One more time - SEARCH is your friend...

lol hytran its like u hate me man lol
i know it has been posted before but no1 has posted all the files/firmwares all in one place...this way people wont have to look around like i had to but have it all in one

...again thanks for your comments though

I hate "forum snobs" who always want to ***** and moan.

good post good intentions new people will appreciate this post. I had to read tons of post before just to flash it

Where is a nice step by step post for the e815?

the outline is the same pretty much and youd follow the same rules, you just need the correct firmware for your e815
this mite help http://v710.org/mark/E815.htm

does anybody know if i can flash from 93r directly to 4br

tnx

you should be able to...i did using rsd lite and it worked out out
make a backup 1st of wat u have now just in case though

u sure 4BR is newer than 93R?

4BR is older than 6CR.

hi i gues yuo are an expert whit the v635 so i am askink help cause i cannt conect the v635 to p2k mode it doesnt ask me for the drivers i tried but with no further succes i am desperate whit his phone it recognise it like an usb memory windows explorer is the one to pop up it only lets me conect in the motorola phone tools mpt then i try with fitter p2ktools it saids phone not conected also whit p2k commander i now is because no drivers but if the machine or i dont now what doesnt recognise it is not use cause mi machine has install the driver for p2k and everithi else
the extrange thing is then i conect a v3 and everithing works i got p2k tool in p2k mode and at evrithing work perfecttly whit v3 just this v635 then canbe recognise what can i do ?

Did you take out the memory card ?
As I recall you may have to go to them menu on the phone and click on connections and select one of the options on there.

Did you click on the link on post #2 on this forum leading to the Tracie Marie post. I guess if you have Mobile Phone Tool 4.0 it will be much easier to regconize you phone. Also go to this link and download the UDI Enabler 2.0, it is going to link to to a site to Motodev.com registration is free to dowload software
http://themotoguide.com/getconnected.php

after you dowload the software just follow instructions on the link above and you will be connected. I seems to be that if you have MPT 4.0 software and run the UDI 2.0 enable which is a driver sotware P2K will be connected as soon as you plug your phone in.

set you phone to data/fax modem not memory card...then connect it to your computer, turn the phone on and windows will ask you to install the drivers...if it doesnt you probably already have the drivers installed, next download a copy of p2kman incase there is something wrong with the one you have and once installed press connect and itll read all the files of your phone...

*if you need a copy of p2k or any other files for the v635 you can pm me if u want